GENM-20 230v Pump
GENM pumps are self-priming and have bronze bodies and single impellers. They have 316 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. (Viton® is available at extra cost). The IP44 motors have a forward and reverse switch for filling and emptying duties. They are also available in 3 phase as ENT pumps.
They are designed mainly for pumping clean liquids at temperatures up to a maximum of 90ºC, but can also handle very small soft solids, in suspension. Maximum recommended suction lift, with a foot valve, is 6 metres.
These are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), bio-fuel, transformer oil and mild chemicals.
However, they must not pump white diesel, petrol, solvents or products with a low flash point.
|Dry weight (kg)||5.9|
|Packing weight (kg)||6.40|