Facebook Pixel
Welcome to the new Wormery website

Fine Mesh Insert for Gutter Mate Diverter and Filter (Original)

£5.99
In stock
SKU
9-0013

Available for both the Original Gutter Mate Diverter & Filter Original & Current Gutter Mate 2. If you have the Original Gutter Mate it will have a 90 degree elbow which pushes into the diverter outlet on the bottom of the filter body. The Gutter Mate 2 has no elbow and the length of the diverter outlet is the same as the main outlet.

Provides a higher degree of rain water filtration (800 micron).

PLEASE NOTE: Two Fine Mesh Inserts for the Gutter Mate Diverter and Filter only. Filter basket and Gutter Mate sold separately.

Fine Mesh Insert for the GutterMate Diverter & Filter

We have 2 sets of FMI. One for the Gutter Mate Original and one for the Gutter Mate 2.

To identify which Gutter Mate you have you can do this without taking apart the filter.

On the Original Gutter Mate, the diverter outlet finishes with a 90 degree bend onto which the connecting hose is fitted. If you have this filter you need to order a FMI set for the Original Gutter Mate.

The Gutter Mate 2 is identified as follows. The diverter outlet is the same length as the main outlet on the filter, there is no bend. Also on the Gutter Mate 2 body, approximately 25mm from the bottom of the body there is an annular ring which has no gloss finish, around the body, this represents the maximum water level in the water butt. On the white GM it is more difficult to see this annular ring.

The Benefits of Fine Mesh Inserts are:

  • Saves buying another filter
  • The degree of filtration is increased more than 20 fold when inserted into filter basket. Up to 800 micron. 
  • Easy to fit
  • Easy to clean
  • Low cost solution to filtration of rainwater
  • Good solution if water needed for use in pressure washer
  • Good solution if using the rain water for car washing
  • Toilet flushing with rainwater.
  • Barrier to insects
  • Can be fitted in seconds


Which Fine Mesh Insert do I order?

If you have the Original Gutter Mate it will have a 90 degree elbow which pushs into the diverter outlet on the bottom of the filter body. The Gutter Mate 2 has no elbow and the length of the diverter outlet is the same as the main outlet.

More Information
Colour Black
Made From 100% Recycled Materials No

Product Installation / Information Guide

Write Your Own Review
You're reviewing:Fine Mesh Insert for Gutter Mate Diverter and Filter (Original)
©Copyright 2020 - The Wormery is a trading name of GM8 Group Ltd. A company registered in England & Wales (company number 4414980) with Magento eCommerce by Screen Pages